Armored Chevrolet C 7500 25 Passenger Low Profile Shuttle Bus ( Large Bus )
ANN 10200614 The ANN Corporation Base Vehicle Specifications -
2006 Chevrolet C 7500 Chassis
- Dual rear wheels - 188” Wheel base - 293.8” Overall length -
Vortec 8.1L V 8 Gasoline Engine - 295 Horse power, 440 ft lbs of torque - Five speed Allison automatic transmission - Air-conditioning - Climate control - Driver information system - Electronic engine hour meter -
AM/FM Stereo - Power outlets 2 in cab power sources(in addition to cigarette lighter) - AM/FM Stereo -
High back bucket seats - 25 Passenger capacity - 3 seats per row x 6 rows - 4 seats in back row - Mirror 102” Integral arm integral convex mirror -
Wipers: intermittent with pulse washers - Bumper front steel painted argent - Front tires 245/75 R 22.5 .G - Rear tires 245/75 R 22.5 G -
Dual Side entrance doors - Rear emergency escape door - Under body storage compartments - Rear luggage storage area - Large tinted windows - Carpeted and heavy duty rubber mat floor -
Rear air conditioning - Double walled, insulated Stainless steel exterior - OEM roof marker lamps - Front mud flaps Armor Conversion Modifications / Alterations -
Five sided armoring of driver and passenger compartments to provide protection against 7.62x 51 mm, M 80 NATO Ball ammunition (level CEN B 6), at zero degree obliquity angle. In accordance with testing procedures utilized by U.S. testing certification procedures. -
Construction design integrates opaque and transparent materials and is structurally designed to with stand and balance structural loads and offers complete 100% protection. -
Floor is fitted with a blast protection to protect occupants against fragmentation from simultaneous detonation of two DM-51 German ordnance hand grenades or equivalent. - The unique engineering and construction of the armor plate design utilized in the vehicle allows the weight of the door to be transmitted directly onto the modified structure. The design distributes weight in such a way as to allow the use of OEM hinge components without the risk of excess stresses due to the added door weight. - Vehicle’s armor plates are stitch-welded using high-intensity MIG welders. The above process ensures the structural integrity is un compromised by thermal and chemical variations of the material. -
The interior frame, constructed of ballistic grade steel, provides overlap and backup protection for the large-surface principal impact areas such as the doors and windows. It also reinforces the structural integrity of the pillars and other areas that are typically ignored or poorly armored by other manufacturers. - Vehicle armoring constructed in such a way as to ensure that a projectile following a linear or angled path shall not enter the vehicle’s interior without contacting the armor material. In addition to this, the possibility of a projectile entering the vehicle’s interior due to a ricochet from the armor shall also be minimized.
Glass - A combination of glass, poly carbonate and Mylar are bonded together using the latest technology, producing one of the finest transparent armors available while incorporating the following qualities: - Anti-spall shield protecting against shattering glass - Multiple impact protection - Finest optical quality, Minimal distortion - No de-lamination - No discoloration from UV rays Doors -
Armor overlap at all doors to prevent penetration through door posts and pillars. - Door pillars and hinges reinforced for maximum strength retention. Electrical - All electrical equipment standard to this vehicle shall be tested and modified as necessary to protect against the armoring process. Interior - All original OEM interior panels and trim will be resized or modified and re-installed wherever possible to obtain as close to an original look as possible Standard Security Features and Accessories -
Run flat devices fitted in all (6) vehicle tires - Suspension system reinforced as necessary to compensate for additional weight. - Steel-case fuel tank protection - All manuals and written information provided by vehicle manufacturer shall be included.
Warranty The armored vehicle manufacturer warranties any armor related items installed, as well as conversion related custom workmanship for the period of 3 years, or 60,000 km, whichever occurs first.
Ballistic Protection Level Details The following charts represent the ballistic protection level CEN B 5 Opaque Armor, passenger compartment roof and 4 sides only: Weapon Caliber Ammunition Velocity Rifle 7.62 x 51 mm M 80 NATO Ball 2,750 fps M 16 5.56 x 45 mm M 855 Ball 3,100 fps AK-47 7.62 x 39 mm M-1943 2,400 fps Sub-machine-gun 9 x 19 mm LCJJ 1,400 fps Tokorev 7.62 x 25 mm LCSJ 1,600 fps Hand Gun 44 Magnum LWC 1,443 fps Transparent Armor: Weapon Caliber Ammunition Velocity Rifle 7.62 x 51 mm M 80 NATO Ball 2,750 fps M 16 5.56 x 45 mm M 855 Ball 3,100 fps AK-47 7.62 x 39 mm M-1943 2,400 fps Sub-machine-gun 9 x 19 mm LCJJ 1,400 fps Tokorev 7.62 x 25 mm LCSJ 1,600 fps Hand Gun 44 Magnum LWC 1,443 fps Floor of passenger compartment is protected to shield against fragmentation from 2(two) DM-51 German ordnance hand grenades or equivalent.
Delivery Schedule VEHICLE ORDER MANUFACTURING LOCATION MANUFACTURING START DATE COMPLETION DATE 1 to 5 CANADA Upon receipt of payment 10-12 weeks
Vehicle Pricing and Optional Equipment Base cost per vehicle, Delivered to UAE $ 236,000.00 with spare parts kit
Payment terms , Account details are to be disclosed upon acceptance of the contract
